40mm Horizontal Cable Carrier Support

These parts are used to mount and support the x-axis cable carrier. The gusset also functions as an area for cables, tubes, and LED light strips to be routed through.

60mm Horizontal Cable Carrier Support

These parts are used to mount and support the y-axis cable carrier. The gusset also functions as an area for cables, tubes, and LED light strips to be routed through.

60mm Vertical Cable Carrier Support

These parts are used to guide and support the z-axis cable carrier. The gusset also functions as an area for the z-axis motor's cables to be routed through.

60mm Cable Carrier Spacer Block

This component offsets the z-axis cable carrier from the cross-slide plate.

Solenoid Valve Mount

This component features slots for the solenoid valve to be mounted with zip ties. It also doubles as a cable management part for routing cables behind the electronics box.

Vacuum Pump Mount

The vacuum pump mount features slots for zip ties to secure the vacuum pump to the z-axis extrusion.

75mm Horizontal Motor Housing

These housings protect the gantry and cross-slide motors and encoders from rain.

80mm Vertical Motor Housing

This component protects the z-axis motor from rain.

Vacuum Pump Housing

This housing protects the vacuum pump from rain. It is mounted on the z-axis extrusion.

Universal Tool Mount

The UTM allows FarmBot to automatically switch tools for the task at hand. It features 12 electrical connections, three liquid/gas lines, and magnetic coupling.

Seeder

The seeder, combined with the vacuum pump, allows FarmBot to pick up seeds and deposit them precisely in the ground.

Watering Nozzle

This two-part tool distributes the stream of water coming from the UTM into a gentle shower for your plants.

Watering Nozzle Top

Watering Nozzle Bottom

Weeder

The weeding tool allows FarmBot to smash weeds into the ground, thereby killing them via mechanical disruption. The tool consists of a base component and interchangeable implements that allow you to customize the tool for your soil conditions and types of weeds.

Weeder Blades

Wide Weeder Blade

Medium Weeder Blade

Narrow Weeder Blade

Soil Sensor

This tool acts as a mount for the soil sensor circuit board.

Seed Bin

This plastic bin allows you to load many seeds of the same type into your FarmBot.

Seed Tray

The seed trays feature 16 small bins allowing you to load 16 precise quantities/types of seeds into your FarmBot.

Seed Trough Holder

This gantry-mounted seed trough holder allows FarmBot to bring seeds with it while traveling along the x-axis, shortening the time needed for seed injection.

Seed Trough

These troughs fit into the seed trough holder, allowing FarmBot to bring seeds with it while traveling along the x-axis.

Camera Mount Half

These small plastic components fasten the borescope camera to the z-axis extrusion.