Genesis Genesis XL
Part Notes Price Cost Qty Subtotal Subtotal Qty Subtotal Subtotal
2.5mm Allen Key 2.5mm Allen Key No plastic bag $1.00 $0.05 1 $1.00 $0.05 1 $1.00 $0.05
2mm Allen Key 2mm Allen Key No plastic bag $1.00 $0.05 1 $1.00 $0.05 1 $1.00 $0.05
T10 Bit Bit - T10 Rev A No plastic bag $3.00 $0.20 1 $3.00 $0.20 1 $3.00 $0.20
T25 Bit Bit - T25 Rev A No plastic bag $3.00 $0.20 1 $3.00 $0.20 1 $3.00 $0.20
Eccentric Spacer M5 x 6mm Eccentric Spacer Rev A --- $2.00 $0.35 9 $18.00 $3.15 9 $18.00 $3.15
T10 Flathead Wood Screw Flathead Wood Screw - T10 x 25mm --- $0.05 $0.007 2 $0.10 $0.01 2 $0.10 $0.01
3mm Hex Driver 3mm Hex Driver No plastic bag $5.00 $1.80 1 $5.00 $1.80 1 $5.00 $1.80
M2.5 x 4mm Screw M2.5 x 4mm Screw Pre-assembled in the electronics box. $0.15 $0.010 8 $1.20 $0.08 8 $1.20 $0.08
M2.5 x 6mm Screw M2.5 x 6mm Screw Pre-assembled in the Rotary Tool. $0.20 $0.012 2 $0.40 $0.02 2 $0.40 $0.02
M3 x 16mm Flat Head Screw M3 x 16mm Flat Head Screw 2mm Hex Drive $0.15 $0.014 2 $0.30 $0.02 2 $0.30 $0.02
M3 Locknut M3 Locknut --- $0.10 $0.016 23 $2.30 $0.36 23 $2.30 $0.36
M3 x 10mm Screw M3 x 10mm Screw --- $0.15 $0.014 4 $0.60 $0.05 4 $0.60 $0.05
M3 x 12mm Screw M3 x 12mm Screw --- $0.15 $0.014 31 $4.65 $0.43 31 $4.65 $0.43
M3 x 35mm Screw M3 x 35mm Screw Pre-assembled in electronics box. $0.20 $0.037 4 $0.80 $0.14 4 $0.80 $0.14
M3 x 4mm Setscrew M3 x 4mm Setscrew Pre-assembled in the GT2 Pulleys. $0.25 $0.05 6 $1.50 $0.30 6 $1.50 $0.30
M4 x 4mm Setscrew M4 x 4mm Setscrew Pre-assembled in the Rotary Tool M5 Shaft Adapter. $0.25 $0.05 1 $0.25 $0.05 1 $0.25 $0.05
M5 Flange Locknut M5 Flange Locknut --- $0.20 $0.09 53 $10.60 $4.77 53 $10.60 $4.77
M5 x 16mm Flat Head Screw M5 x 16mm Flat Head Screw 3mm Hex Drive $0.28 $0.042 3 $0.84 $0.12 3 $0.84 $0.12
M5 x 10mm Screw M5 x 10mm Screw --- $0.15 $0.026 53 $7.95 $1.37 53 $7.95 $1.37
M5 x 12mm Screw M5 x 12mm Screw --- $0.15 $0.026 8 $1.20 $0.20 8 $1.20 $0.20
M5 x 16mm Screw M5 x 16mm Screw 10 Pre-assembled in UTM and Tools, remaining in bag $0.20 $0.033 20 $4.00 $0.66 28 $5.60 $0.92
M5 x 20mm Screw M5 x 20mm Screw --- $0.30 $0.056 11 $3.30 $0.61 11 $3.30 $0.61
M5 x 25mm Screw M5 x 25mm Screw --- $0.30 $0.056 4 $1.20 $0.22 4 $1.20 $0.22
M5 x 30mm Screw M5 x 30mm Screw 3 pre-assembled in Tools, 40 in bag $0.30 $0.056 25 $7.50 $1.40 25 $7.50 $1.40
M5 x 4mm Setscrew M5 x 4mm Setcrew --- $0.15 $0.026 25 $3.75 $0.65 55 $8.25 $1.43
Countersunk Magnet Magnet - UTM Rev A Pre-assembled in the UTM. $5.00 $0.85 3 $15.00 $2.55 3 $15.00 $2.55
Standard Magnet Magnet - Tool Rev A Pre-assembled in all tools. $3.00 $0.36 12 $36.00 $4.32 12 $36.00 $4.32
10mm Nut Bar Nut Bar - 10mm Rev A --- $1.00 $0.30 12 $12.00 $3.60 12 $12.00 $3.60
160mm Nut Bar Nut Bar - 160mm Rev A --- $5.00 $1.15 3 $15.00 $3.45 6 $30.00 $6.90
20mm Nut Bar Nut Bar - 20mm Rev A --- $1.50 $0.45 6 $9.00 $2.70 6 $9.00 $2.70
40mm Nut Bar Nut Bar - 40mm Rev A --- $1.75 $0.56 19 $33.25 $10.64 25 $43.75 $14.00
60mm Nut Bar Nut Bar - 60mm --- $2.00 $0.68 4 $8.00 $2.72 4 $8.00 $2.72
Rotary Tool Chuck Adapter Rotary Tool Chuck Adapter Rev B --- $5.00 $0.90 1 $5.00 $0.90 1 $5.00 $0.90
Rotary Tool Chuck Rotary Tool Chuck Only include chuck part (no other parts) $10.00 $2.90 1 $10.00 $2.90 1 $10.00 $2.90
Rotary Tool M5 Shaft Adapter Rotary Tool M5 Shaft Adapter Rev C Setscrew must be inserted with blue thread locker $5.00 $0.90 1 $5.00 $0.90 1 $5.00 $0.90
Rotary Tool Shaft Extension Rotary Tool Shaft Extension Rev B --- $5.00 $0.90 1 $5.00 $0.90 1 $5.00 $0.90
Rotary Tool Trimmer Mount Rotary Tool Trimmer Mount Rev C --- $5.00 $0.90 1 $5.00 $0.90 1 $5.00 $0.90
Rotary Tool Trimmer Rotary Tool Trimmer Included in press-to-seal bag in Rotary Tool Box $5.00 $0.005 30 $150.00 $0.15 30 $150.00 $0.15
Standard Spacer M5 x 6mm Spacer Rev A --- $0.20 $0.115 11 $2.20 $1.26 11 $2.20 $1.26
T25 Wood Screw Wood Screw - T25 x 25mm --- $0.05 $0.007 35 $1.75 $0.24 55 $2.75 $0.38
5.5mm and 8mm Combo Wrench Wrench - 8mm and 5.5mm Combo Rev A No plastic bag $3.00 $0.10 1 $3.00 $0.10 1 $3.00 $0.10
200mm Zip Tie Zip Tie - 200mm --- $0.10 $0.015 4 $0.40 $0.06 4 $0.40 $0.06
TOTAL 444 $399.04 $55.28 511 $431.64 $63.27

Component tests

Size and shape

Test Description Target Tolerance
Drive size Use the appropriate hex or nut driver to check the drive size of screws and nuts. M3, M5, 5.5mm, 8mm, etc N/A
Screw length Measure the length of screws with digital calipers. See BOM spec. +/- 0.5mm
Threads Measure threads of screws and nuts using a thread gauge See BOM spec. N/A
Head diameter Measure the diameter of screw heads with digital calipers. See BOM spec. +/- 0.2mm
Head height Measure the height of screw heads with digital calipers. See BOM spec. +/- 0.2mm
Nut height Measure the height of nuts with digital calipers See BOM spec. +/- 0.2mm
Flange diameter Measure the diameter of locknut flanges with digital calipers. See BOM spec. +/- 0.2mm

Material and appearance

Test Description Target Tolerance
Material Ensure the material is aluminum or stainless steel and will not rust by holding a magnet to the part. Aluminum or stainless steel (no magnetic attraction) Weak attraction to stainless steel is permissible.

Function

Test Description Target Tolerance
Threading Fasten screws and nuts to reference mating component to ensure thread size and quality. Components should thread together smoothly. Test 10 pieces. N/A
Locking Tighten locknuts onto a screw and try to remove by hand. Locknut should resist being removed. Test 3 pieces. N/A