material Clear polycarbonate
OD 23.9mm
ID 16mm
thickness 10.23mm
Price $6.00
Quantity Genesis - 30
Genesis XL - 30
CAD model Onshape
Purchase The FarmBot Shop
internal-part-name V-Wheel
rev A
cost $1.35
notes Pre-assembled w/ two SS 625-2RS Bearings and one SS M5 Precision Shim.

Component tests

Test Description Target Tolerance
Outer diameter Measure the outer diameter of the v-wheel with digital calipers. 23.89mm +/- 0.1mm
Inner diameter Measure the inner diameter of the v-wheel (where the bearings will sit) with digital calipers. 15.974mm +/- 0.05mm
Bearing fit Assemble a V-wheel, two bearings, and an M5 precision shim. Assembly should fit together snug without play. N/A
Width Measure the width of the v-wheel with digital calipers. 10.23mm +/- 0.1mm
V-angle Using a digital protractor, measure the angle that the two V-sides of the wheel create. 90 degrees +/- 2 degrees
Extrusion fit Roll a V-wheel along an extrusion. The wheel should fit properly in the V-slot of the extrusion. N/A
Smoothness Inspect the wheel to ensure there are no erroneous grooves, cuts, or nicks No blemishes N/A