cable color Black
Price $1.00
Quantity Genesis - 4
Genesis XL - 4
CAD model Onshape
Purchase The FarmBot Shop
internal-part-name LED Indicator - Wiring Harness
cost $0.50

Component tests

Test Description Target Tolerance
Diameter Measure the diameter of the threaded section using digital calipers. 11.8mm +/- 0.2mm
Electronics box fit Check fit in electronics box. LED should fit with minimal play such that o-ring is guaranteed to seal. N/A
Length Measure the overall length using digital calipers. 24mm +/- 1mm
O-ring Inspect for the presence of an O-ring under the top flange. Present N/A
Waterproof Drill a hole in a small plastic tub. Fasten the LED indicator to the hole and fill the tub with water. The LED indicator should continue to operate when submerged, and prevent water from leaking. N/A
Wiring harness Connect wiring harness between LED and Pi Adapter Board. LED should work, harness should be of adequate length, and connectors should stay firmly attached. N/A
Material Ensure the material will not rust by holding a magnet to the part. Stainless steel (no magnetic attraction) Weak attraction to stainless steel is permissible.
Illumination Power on FarmBot. The Sync and Connectivity indicators should be illuminated N/A