Genesis Genesis XL
Part Notes Price Cost Qty Subtotal Subtotal Qty Subtotal Subtotal
2mm Allen Key 2mm Allen Key No plastic bag $1.00 $0.05 1 $1.00 $0.05 1 $1.00 $0.05
T10 Bit Bit - T10 Rev A No plastic bag $3.00 $0.20 1 $3.00 $0.20 1 $3.00 $0.20
T25 Bit Bit - T25 Rev A No plastic bag $3.00 $0.20 1 $3.00 $0.20 1 $3.00 $0.20
Eccentric Spacer M5 x 6mm Eccentric Spacer Rev A --- $2.00 $0.35 15 $30.00 $5.25 15 $30.00 $5.25
T10 Flathead Wood Screw Flathead Wood Screw - T10 x 25mm --- $0.05 $0.007 2 $0.10 $0.01 2 $0.10 $0.01
3mm Hex Driver 3mm Hex Driver No plastic bag $5.00 $1.80 1 $5.00 $1.80 1 $5.00 $1.80
M2.5 x 4mm Screw M2.5 x 4mm Screw Pre-assembled in the electronics box. $0.15 $0.010 8 $1.20 $0.08 8 $1.20 $0.08
M2.5 x 6mm Screw M2.5 x 6mm Screw Pre-assembled in the Rotary Tool. $0.20 $0.012 2 $0.40 $0.02 2 $0.40 $0.02
M3 x 16mm Flat Head Screw M3 x 16mm Flat Head Screw 2mm Hex Drive $0.15 $0.014 4 $0.60 $0.05 4 $0.60 $0.05
M3 Locknut M3 Locknut 4 pieces are pre-assembled in electronics box, 20 pieces packed in bag $0.10 $0.016 24 $2.40 $0.38 24 $2.40 $0.38
M3 x 12mm Screw M3 x 12mm Screw --- $0.15 $0.014 35 $5.25 $0.49 35 $5.25 $0.49
M3 x 35mm Screw M3 x 35mm Screw Pre-assembled in electronics box. $0.20 $0.037 4 $0.80 $0.14 4 $0.80 $0.14
M3 x 6mm Screw M3 x 6mm Screw --- $0.10 $0.009 10 $1.00 $0.09 10 $1.00 $0.09
M3 x 4mm Setscrew M3 x 4mm Setscrew Pre-assembled in the GT2 Pulleys. $0.25 $0.05 6 $1.50 $0.30 6 $1.50 $0.30
M4 x 4mm Setscrew M4 x 4mm Setscrew Pre-assembled in the Rotary Tool M5 Shaft Adapter. $0.25 $0.05 1 $0.25 $0.05 1 $0.25 $0.05
M5 Flange Locknut M5 Flange Locknut --- $0.20 $0.09 70 $14.00 $6.30 70 $14.00 $6.30
M5 x 22mm Flat Head Screw M5 x 16mm Flat Head Screw 3mm Hex Drive $0.28 $0.042 3 $0.84 $0.12 3 $0.84 $0.12
M5 x 10mm Screw M5 x 10mm Screw --- $0.15 $0.026 150 $22.50 $3.90 200 $30.00 $5.20
M5 x 16mm Screw M5 x 16mm Screw 12 Pre-assembled in UTM and Tools, 15 in bag $0.20 $0.033 27 $5.40 $0.89 27 $5.40 $0.89
M5 x 30mm Screw M5 x 30mm Screw 3 pre-assembled in Tools, 40 in bag $0.30 $0.056 43 $12.90 $2.40 43 $12.90 $2.40
M5 x 4mm Setscrew M5 x 4mm Setcrew --- $0.15 $0.026 4 $0.60 $0.10 12 $1.80 $0.31
Countersunk Magnet Ring Magnet - Countersunk Rev A Pre-assembled in Rotary Tool. $5.00 $0.85 3 $15.00 $2.55 3 $15.00 $2.55
Standard Magnet Ring Magnet - Standard Rev A Pre-assembled in Seeder, Watering Nozzle, Weeder, and Soil Sensor Tools. Quantity updated for production run 2. $3.00 $0.36 15 $45.00 $5.40 15 $45.00 $5.40
100mm Nut Bar Nut Bar - 100mm Rev A --- $2.50 $1.02 2 $5.00 $2.04 6 $15.00 $6.12
10mm Nut Bar Nut Bar - 10mm Rev A --- $1.00 $0.30 14 $14.00 $4.20 14 $14.00 $4.20
140mm Nut Bar Nut Bar - 140mm Rev A --- $3.00 $1.09 0 --- --- 2 $6.00 $2.18
20mm Nut Bar Nut Bar - 20mm Rev A --- $1.50 $0.45 6 $9.00 $2.70 6 $9.00 $2.70
40mm Nut Bar Nut Bar - 40mm Rev A --- $1.75 $0.56 24 $42.00 $13.44 42 $73.50 $23.52
60mm Nut Bar Nut Bar - 60mm --- $2.00 $0.68 20 $40.00 $13.60 20 $40.00 $13.60
Rotary Tool Chuck Adapter Rotary Tool Chuck Adapter Rev B --- $5.00 $0.90 1 $5.00 $0.90 1 $5.00 $0.90
Rotary Tool Chuck Rotary Tool Chuck Only include chuck part (no other parts) $10.00 $2.90 1 $10.00 $2.90 1 $10.00 $2.90
Rotary Tool M5 Shaft Adapter Rotary Tool M5 Shaft Adapter Rev C Setscrew must be inserted with blue thread locker $5.00 $0.90 1 $5.00 $0.90 1 $5.00 $0.90
Rotary Tool Shaft Extension Rotary Tool Shaft Extension Rev B --- $5.00 $0.90 1 $5.00 $0.90 1 $5.00 $0.90
Rotary Tool Trimmer Mount Rotary Tool Trimmer Mount Rev C --- $5.00 $0.90 1 $5.00 $0.90 1 $5.00 $0.90
Rotary Tool Trimmer Rotary Tool Trimmer Included in press-to-seal bag in Rotary Tool Box $5.00 $0.005 30 $150.00 $0.15 30 $150.00 $0.15
Standard Spacer M5 x 6mm Spacer Rev A --- $0.20 $0.115 30 $6.00 $3.45 30 $6.00 $3.45
T25 Wood Screw Wood Screw - T25 x 25mm --- $0.05 $0.007 40 $2.00 $0.28 60 $3.00 $0.42
5.5mm and 8mm Combo Wrench Wrench - 8mm and 5.5mm Combo Rev A No plastic bag $3.00 $0.10 1 $3.00 $0.10 1 $3.00 $0.10
100mm Zip Tie Zip Tie - 100mm --- $0.07 $0.006 25 $1.75 $0.15 25 $1.75 $0.15
200mm Zip Tie Zip Tie - 200mm --- $0.10 $0.015 4 $0.40 $0.06 4 $0.40 $0.06
TOTAL 631 $474.89 $77.48 733 $532.09 $95.47

Component tests

Size and shape

Test Description Target Tolerance
Drive size Use the appropriate hex or nut driver to check the drive size of screws and nuts. M3, M5, 5.5mm, 8mm, etc N/A
Screw length Measure the length of screws with digital calipers. See BOM spec. +/- 0.5mm
Threads Measure threads of screws and nuts using a thread gauge See BOM spec. N/A
Head diameter Measure the diameter of screw heads with digital calipers. See BOM spec. +/- 0.2mm
Head height Measure the height of screw heads with digital calipers. See BOM spec. +/- 0.2mm
Nut height Measure the height of nuts with digital calipers See BOM spec. +/- 0.2mm
Flange diameter Measure the diameter of locknut flanges with digital calipers. See BOM spec. +/- 0.2mm

Material and appearance

Test Description Target Tolerance
Material Ensure the material is aluminum or stainless steel and will not rust by holding a magnet to the part. Aluminum or stainless steel (no magnetic attraction) Weak attraction to stainless steel is permissible.

Function

Test Description Target Tolerance
Threading Fasten screws and nuts to reference mating component to ensure thread size and quality. Components should thread together smoothly. Test 10 pieces. N/A
Locking Tighten locknuts onto a screw and try to remove by hand. Locknut should resist being removed. Test 3 pieces. N/A