Cross-Slide
Documentation and Assembly Instructions for the FarmBot Genesis Cross-Slide
Component List
To prepare for assembly, gather all the components from the table below and lay them out in a logical manner. To complete the assembly in the next pages, you will also need the following tools:
- 3mm hex (allen) wrench
- 8mm wrench
Note: Not all required parts are shown in this image.
| Qty. | Component |
|---|---|
| 1 | Cross-Slide Plate |
| 2 | M3 x 5mm Setscrews |
| 4 | M5 x 16mm Screws |
| 12 | M5 x 30mm Screws |
| 6 | M5 x 6mm Spacers |
| 6 | 6mm Eccentric Spacers |
| 14 | M5 Washers |
| 16 | M5 Locknuts |
| 1 | Horizontal Motor Housing |
| 1 | Long Cable Carrier Mount |
| 12 | Complete V-Wheels (one polycarbonate wheel, two 16 x 5 x 5mm ball bearings, and one 10 x 5 x 1mm shim) |
| 1 | Leadscrew Block |
| 1 | NEMA 17 Stepper Motor and Rotary Encoder with 2500mm length cables |
| 1 | 20 tooth GT2 Pulley |
| 2 | Belt Clip Plates |
| 1 | Y-Axis Belt |
| 2 | M3 x 10mm Screws |