Component List

To prepare for assembly, gather all the components from the table below and lay them out in a logical manner. To complete the assembly in the next pages, you will also need the following tools:

  • 3mm allen (hex) wrench
  • 8mm wrench

2 hours

This is the estimated time it will take to assemble the Gantry.

Qty. Component
1 Gantry Main Beam (20 x 60 x 1500mm aluminum extrusion)
2 Gantry Columns (20 x 60 x 650mm aluminum extrusion)
2 Gantry Wheel Plates
2 Gantry Corner Brackets
4 Belt Clip Plates
8 M3 x 10mm Screws
4 M3 x 5mm Setscrew
48 M5 x 10mm Screws
28 M5 x 30mm Screws
10 M5 x 6mm Spacers
8 M5 x 6mm Eccentric Spacers
22 M5 Washers
48 M5 Tee Nuts
22 M5 Locknuts
2 Horizontal Motor Housing
6 Cable Carrier Supports
18 Complete V-Wheels (one polycarbonate wheel, two 16 x 5 x 5mm rubber sealed ball bearings, and one M5 shim)
1 NEMA 17 Stepper Motor and Rotary Encoder with 750mm length cables
1 NEMA 17 Stepper Motor and Rotary Encoder with 2800mm length cables
2 20 tooth GT2 Pulleys
1 2m GT2 Timing Belt

What’s next?