Tool Spec
Want to design and make your own tools for FarmBot? Follow these instructions to ensure compatibility with the universal tool mount (UTM), the tool bay, and your FarmBot’s electronics.
Unlimited possibilites
These specs must be followed to ensure your tool works with a stock FarmBot. However, don’t shy away from experimentation and the possibility of modifying your UTM, tool bay, or electronics to accommodate your desired tool design. FarmBot is yours to play with and modify.
Hardware Requirements
Design your tools to meet these hardware specifications to ensure compatibility with FarmBot. Additionally you will need to design your tool so that it can be produced with available tools, processes, and materials; and stand up to the outdoor environment and other expected stresses.
Required Components
- Plastic “tool base”
- Three 15 x 5 x 5 mm ring magnets secured with M5 screws and locknuts
- Two M3 electrical screws and locknuts, and a small jumper wire used for tool verification
Specs
- Max weight: 2 kg / 4.5 lbs
- Max height: 200 mm / 8 inches
- Max diameter: 100 mm / 4 inches
Size, shape, and layout
Tools must have the correct physical dimensions and component layout on the top face so that they can correctly couple and de-couple with the UTM as well as slide in and out of the tool bay. Study the drawings below to ensure you design your tool accordingly.
Start with a CAD model
Want to get a headstart on design? Download a tool base CAD model from the CAD Models and Drawings page.
This 3D model shows the features of our downloadable tool base: