UTM Maintenance
Inspect the Seals
It is possible that intense temperature and adverse weather cycles could degrade the rubber seals between the UTM cover and the cables and tubing connected to the UTM.
Once per year
Inspect the rubber seals to ensure they are not cracked, broken, or otherwise degraded to the point of sealing ineffectively. If any damage is found, replace them as soon as possible.
Remove Magnetic Debris Buildup
It is possible for dust, soil, and other debris to magnetically attract to the UTM’s magnets and build up over time. This debris can prevent the UTM from correctly mounting tools.
Once per year
Inspect the UTM’s magnets for debris. If any is found, remove the M5 locknut and screw holding the magnet in place and remove the magnet for cleaning.