Gantry
Documentation and assembly instructions for the FarmBot Genesis gantry
Note: This image is of the back side of the gantry.
Component list
| Component | Genesis Qty | XL Qty |
|---|---|---|
| Gantry Main Beams (20 x 60 x 1500mm extrusion) | 1 | 2 |
| Gantry Columns (20 x 60 x 500mm extrusion) | 2 | 2 |
| Gantry Wheel Plates | 2 | 2 |
| Gantry Corner Brackets (left-hand and right-hand versions) | 2 | 2 |
| Gantry Joining Bracket | - | 1 |
| Belt Clips | 4 | 4 |
| M3 x 12mm Screws | 8 | 8 |
| M5 x 10mm Screws | 72 | 100 |
| M5 x 30mm Screws | 18 | 18 |
| M5 x 6mm Spacers | 10 | 10 |
| M5 x 6mm Eccentric Spacers | 8 | 8 |
| M5 Washers | 18 | 18 |
| M5 Tee Nuts | 72 | 100 |
| M5 Locknuts | 18 | 18 |
| Horizontal Motor Housings | 2 | 2 |
| Horizontal Cable Carrier Supports | 7 | 13 |
| V-wheels | 18 | 18 |
| NEMA 17 Stepper Motor with Rotary Encoders | 2 | 2 |
| 20 tooth GT2 Pulleys with setscrews | 2 | 2 |
| X-Axis GT2 Timing Belts | 2 | 2 |
2 hours
This is the estimated time it will take to assemble the Gantry.