Page Contents

Inspect the grommets and o-rings

It is possible that intense temperature and adverse weather cycles could degrade the rubber grommets in the UTM cover and the o-rings on the bottom of the UTM.

Once per year

Inspect the rubber grommets and o-rings to ensure they are not cracked, broken, or otherwise degraded to the point of sealing ineffectively. If any damage is found, replace them as soon as possible.

Remove magnetic debris

It is possible for dust, soil, and other debris to magnetically attract to the UTM’s magnets and build up over time. This debris can prevent the UTM from correctly mounting tools.

Once per year

Inspect the UTM’s magnets for debris. If any is found, remove the M5 locknut and screw holding the magnet in place and remove the magnet for cleaning.

What’s next?