Cross-Slide
Documentation and assembly instructions for the FarmBot Genesis cross-slide
View of the cross-slide from the front of FarmBot
View of the cross-slide from the back of FarmBot
Component list
To prepare for assembly, gather all the components from the table below and lay them out in a logical manner. To complete the assembly in the next pages, you will also need the following tools:
| Qty. | Component |
|---|---|
| 1 | Cross-Slide Plate |
| 2 | M3 x 5mm Setscrews |
| 4 | M5 x 16mm Screws |
| 12 | M5 x 30mm Screws |
| 6 | M5 x 6mm Spacers |
| 6 | 6mm Eccentric Spacers |
| 14 | M5 Washers |
| 16 | M5 Locknuts |
| 1 | Horizontal Motor Housing |
| 1 | Long CC Mount |
| 12 | Complete V-Wheels (one v-wheel, two bearings, and one M5 shim) |
| 1 | Leadscrew Block |
| 1 | NEMA 17 Stepper Motor with Rotary Encoder |
| 1 | 20 tooth GT2 Pulley |
| 1 | Y-Axis Belt |
| 2 | M3 x 10mm Screws |