Page Contents

Qty. Component $/unit Subtotal
18 15 x 5 x 5mm Ring Magnets $3.00 $54.00
15 Compression Springs $0.50 $7.50
50 60mm Zip Ties $0.05 $2.50
25 100mm Zip Ties $0.07 $1.75
5 200mm Zip Ties $0.10 $0.50
2 Red Markers $0.50 $1.00
1 3mm Hex Driver $5.00 $5.00
1 2mm Hex Driver $5.00 $5.00
1 8mm Box Wrench $5.00 $5.00
1 5.5mm Box Wrench $5.00 $5.00
1 8mm Wrench $3.00 $3.00
1 Phillips Screwdriver $5.00 $5.00
121 TOTALS   $95.25

Ring Magnets

These magnets keep tools attached to the UTM.

Material Neodymium (NdFeB)
Coating Nickle (Ni)
Magnetization Through ring
Outer Diameter 15mm
Inner Diameter 5mm
Thickness 5mm
Price $3.00
Quantity 18 (3 extras included)

Compression Springs

These springs keep the screws in the UTM in contact with screws in the tools for electrical connections.

Material Stainless Steel
Free Length 10mm
Outer Diameter 4mm
Inner Diameter 3.5mm
Wire Diameter 0.25mm
Price $0.50
Quantity 15 (3 extras included)

Zip Ties

Zip ties are used to attach wires to the UTM electrical connection screws, to fasten the vacuum pump, and for cable management throughout FarmBot.

Material Nylon
Color Black
Length 60mm, 100mm, and 200mm
Price 60mm length - $0.05
100mm length - $0.07
200mm length - $0.10
Quantity 60mm length - 50
100mm length - 25
200mm length - 5

60mm Zip Ties

100mm Zip Ties

200mm Zip Ties

Red Markers

Used to calibrate FarmBot’s camera for pixel to coordinate conversion software (used for Weed Detection).

Material Rubber
Color Red
Price $0.50
Quantity 2

3mm Hex Driver

This hex (allen) driver is used to tighten all of the M5 screws on FarmBot.

Hex Size 3mm
Bit Material Hardened steel with a titanium nitride coating
Handle Material Anodized aluminum
Price $5.00
Quantity 1

2mm Hex Driver

This hex (allen) driver is used to tighten all of the M3 screws and setscrews on FarmBot.

Hex Size 2mm
Bit Material Hardened steel with a titanium nitride coating
Handle Material Anodized aluminum
Price $5.00
Quantity 1

8mm Box Wrench

This box wrench is used to tighten all of the M5 screws on FarmBot.

Box Size 8mm
Handle Material Anodized aluminum
Price $5.00
Quantity 1

5.5mm Box Wrench

This box wrench is used to tighten all of the M3 locknuts on FarmBot.

Box Size 5.5mm
Handle Material Anodized aluminum
Price $5.00
Quantity 1

8mm Wrench

The wrench is for tightening M5 locknuts and adjusting eccentric spacers throughout FarmBot.

Size 8mm
Price $3.00
Quantity 1

Phillips Screwdriver

Use this screwdriver to mount your track end plates, track joining plates, and toolbays.

Bit Size 6mm
Price $5.00
Quantity 1