Miscellaneous
Tech specs for the miscellaneous components in FarmBot Genesis. Visit our shop to purchase parts.
| Qty. | Component | $/unit | Subtotal |
|---|---|---|---|
| 18 | 15 x 5 x 5mm Ring Magnets | $3.00 | $54.00 |
| 15 | Compression Springs | $0.50 | $7.50 |
| 50 | 60mm Zip Ties | $0.05 | $2.50 |
| 25 | 100mm Zip Ties | $0.07 | $1.75 |
| 5 | 200mm Zip Ties | $0.10 | $0.50 |
| 2 | Red Markers | $0.50 | $1.00 |
| 1 | 3mm Hex Driver | $5.00 | $5.00 |
| 1 | 2mm Hex Driver | $5.00 | $5.00 |
| 1 | 8mm Box Wrench | $5.00 | $5.00 |
| 1 | 5.5mm Box Wrench | $5.00 | $5.00 |
| 1 | 8mm Wrench | $3.00 | $3.00 |
| 1 | Phillips Screwdriver | $5.00 | $5.00 |
| 121 | TOTALS | $95.25 |
Ring Magnets
These magnets keep tools attached to the UTM.
| Material | Neodymium (NdFeB) |
| Coating | Nickle (Ni) |
| Magnetization | Through ring |
| Outer Diameter | 15mm |
| Inner Diameter | 5mm |
| Thickness | 5mm |
| Price | $3.00 |
| Quantity | 18 (3 extras included) |
Compression Springs
These springs keep the screws in the UTM in contact with screws in the tools for electrical connections.
| Material | Stainless Steel |
| Free Length | 10mm |
| Outer Diameter | 4mm |
| Inner Diameter | 3.5mm |
| Wire Diameter | 0.25mm |
| Price | $0.50 |
| Quantity | 15 (3 extras included) |
Zip Ties
Zip ties are used to attach wires to the UTM electrical connection screws, to fasten the vacuum pump, and for cable management throughout FarmBot.
| Material | Nylon |
| Color | Black |
| Length | 60mm, 100mm, and 200mm |
| Price | 60mm length - $0.05 100mm length - $0.07 200mm length - $0.10 |
| Quantity | 60mm length - 50 100mm length - 25 200mm length - 5 |
60mm Zip Ties
100mm Zip Ties
200mm Zip Ties
Red Markers
Used to calibrate FarmBot’s camera for pixel to coordinate conversion software (used for Weed Detection).
| Material | Rubber |
| Color | Red |
| Price | $0.50 |
| Quantity | 2 |
3mm Hex Driver
This hex (allen) driver is used to tighten all of the M5 screws on FarmBot.
| Hex Size | 3mm |
| Bit Material | Hardened steel with a titanium nitride coating |
| Handle Material | Anodized aluminum |
| Price | $5.00 |
| Quantity | 1 |
2mm Hex Driver
This hex (allen) driver is used to tighten all of the M3 screws and setscrews on FarmBot.
| Hex Size | 2mm |
| Bit Material | Hardened steel with a titanium nitride coating |
| Handle Material | Anodized aluminum |
| Price | $5.00 |
| Quantity | 1 |
8mm Box Wrench
This box wrench is used to tighten all of the M5 screws on FarmBot.
| Box Size | 8mm |
| Handle Material | Anodized aluminum |
| Price | $5.00 |
| Quantity | 1 |
5.5mm Box Wrench
This box wrench is used to tighten all of the M3 locknuts on FarmBot.
| Box Size | 5.5mm |
| Handle Material | Anodized aluminum |
| Price | $5.00 |
| Quantity | 1 |
8mm Wrench
The wrench is for tightening M5 locknuts and adjusting eccentric spacers throughout FarmBot.
| Size | 8mm |
| Price | $3.00 |
| Quantity | 1 |
Phillips Screwdriver
Use this screwdriver to mount your track end plates, track joining plates, and toolbays.
| Bit Size | 6mm |
| Price | $5.00 |
| Quantity | 1 |
