Component $/Unit Genesis Qty Genesis Subtotal XL Qty XL Subtotal MAX Qty MAX Subtotal
M2.5 x 4mm Screws $0.15 8 $1.20 8 $1.20 8 $1.20
M2.5 x 16mm M/F Standoffs * $0.50 4 $2.00 4 $2.00 4 $2.00
M3 x 6mm Screws $0.10 10 $1.00 10 $1.00 10 $1.00
M3 x 12mm Screws $0.15 40 $6.00 40 $6.00 40 $6.00
M3 x 35mm Screws $0.20 4 $0.80 4 $0.80 4 $0.80
M3 Locknuts $0.10 20 $2.00 20 $2.00 20 $2.00
M5 x 10mm Screws $0.15 150 $22.50 225 $33.75 400 $60.00
M5 x 16mm Screws $0.20 40 $8.00 40 $8.00 40 $8.00
M5 x 30mm Screws $0.30 45 $13.50 45 $13.50 45 $13.50
M5 Flange Locknuts $0.10 70 $7.00 70 $7.00 70 $7.00
M5 x 6mm Spacers $0.20 30 $6.00 30 $6.00 30 $6.00
M5 x 6mm Eccentric Spacers $2.00 15 $30.00 15 $30.00 15 $30.00
M5 Tee Nuts $0.40 20 $8.00 20 $8.00 20 $8.00
20mm Nut Bar $1.50 6 $9.00 6 $9.00 6 $9.00
40mm Nut Bar $1.75 28 $49.00 54 $94.50 134 $234.50
60mm Nut Bar $2.00 20 $40.00 24 $48.00 24 $48.00
100mm Nut Bar * $2.50 2 $5.00 6 $15.00 - -
140mm Nut Bar * $3.00 - - 2 $6.00 - -
25mm Wood Screws $0.05 35 $1.75 60 $3.00 124 $6.20
Dowel Pins * $2.00 6 $12.00 20 $40.00 52 $104.00
15 x 5 x 5mm Ring Magnets $3.00 21 $63.00 21 $63.00 21 $63.00
Zip Ties * $0.05 to $0.10 85 $5.25 85 $5.25 85 $5.25
Assembly Tools $1.00 to $5.00 8 $32.00 8 $32.00 8 $32.00
TOTALS   665 $252.20 809 $415.20 1,160 $648.65

* See special note in BOM listing

M2.5 x 4mm Screws

These screws are used to mount the electronics boards into the electronics box with the M2.5 M/F standoffs as an intermediary component.

Threads M2.5
Length 4mm
Drive Size 2mm hex
Material Stainless steel
Price $0.15
Quantity 8 (pre-assembled in the electronics box)
Internal Part Name M2.5 x 4mm Screw (2mm Hex Drive)
Vendor  
$/pc $0.009
Component Tests Fasteners and hardware tests
Notes  

M3 Screws

M3 screws are used throughout FarmBot for mounting motors and other small electronic components on the tools.

Threads M3 x 0.5mm
Lengths 6mm, 12mm, 35mm
Trade Name M3 Low-Profile Socket Head Cap Screw
Material Stainless Steel
Head Height 2mm
Head Diameter 5.5mm
Drive Size 2mm hex
Price 6mm - $0.10
12mm - $0.15
35mm - $0.20
Quantity 6mm - 10
12mm - 40
35mm - 4 (pre-assembled in the electronics box)
Internal Part Name M3 x 6mm Screw
M3 x 12mm Screw
M3 x 35mm Screw
Vendor  
$/pc 6mm - $0.008
12mm - $0.012
35mm - $0.032
Component Tests Fasteners and hardware tests
Notes  

M3 x 6mm Screws

M3 x 12mm Screws

M3 x 35mm Screws

Image coming soon

M5 Screws

M5 button-head screws of various lengths are used throughout FarmBot to attach plates and 3D printed parts to extrusions, V-wheels to plates, and other components together. They are usually used in combination with M5 washers, and terminated with an M5 tee nut or locknut. The button head provides a wide bearing surface, a low-profile head, and a finished appearance. Length is measured from under the head.

Threads M5 x 0.8mm
Lengths 10, 16, and 30mm
Trade Name Button-Head Socket Cap Screw
Material Stainless Steel
Head Height 2.75mm
Head Diameter 9.5mm
Drive Size 3mm hex
Price 10mm - $0.15
16mm - $0.20
30mm - $0.30
Quantity 10mm - Genesis: 150, Genesis XL: 225, Genesis MAX: 400
16mm - 40
30mm - 45
Internal Part Name M5 x 10mm Screw
M5 x 16mm Screw
M5 x 30mm Screw
Vendor  
$/pc 10mm - $0.023
16mm - $0.029
30mm - $0.049
Component Tests Fasteners and hardware tests
Notes  

M5 x 10mm Screws

M5 x 16mm Screws

M5 x 30mm Screws

Locknuts

Locknuts are used throughout FarmBot to secure M3 and M5 screws in place. The nylon insert allows the locknut to resist loosening when subjected to vibration.

Trade Name Nylon-Insert Locknut
Threads M3 x 0.5mm
M5 x 0.8mm
Height M3 - 4mm
M5 - 5mm
Width M3 - 5.5mm
M5 - 8mm
Material Stainless Steel
Price M3 - $0.10
M5 - $0.15
Quantity M3 - 20 (4 pieces pre-assembled in electronics box, 16 pieces packed in bag)
M5 - 70
Internal Part Name M3 Locknut
M5 Flange Locknut
Vendor  
$/pc M3 - $0.014
M5 - $0.08
Component Tests Fasteners and hardware tests
Notes  

M3 Locknuts

M5 Flange Locknuts

Spacers

These spacers are used to offset V-wheels from plates so that they may engage extrusions.

Material Aluminum
Outer Diameter 10mm
Inner Diameter 5.1mm
Length 6mm
Price $0.20
Quantity 30 (12 extra)
Internal Part Name M5 x 6mm Spacer
Vendor  
$/pc $0.10
Component Tests Fasteners and hardware tests
Notes  

M5 x 6mm Spacers

Eccentric Spacers

When rotated, eccentric spacers accurately position V-wheels on a plate such that they can firmly engage V-slot aluminum extrusions. They are only used on wheels on one side of an extrusion. Adjustments are made by using a 8mm wrench on the spacer itself.

Material Stainless Steel
Height 6mm (not including rim)
Bore 5mm
Rim Diameter Fits into a 7.12mm hole
Hex Size 8mm
Divot Indicates shortest distance from rim to bore
Price $2.00
Quantity 15
Internal Part Name M5 x 6mm Eccentric Spacer
Vendor  
$/pc $0.30
Component Tests Fasteners and hardware tests
Notes  

M5 x 6mm Eccentric Spacers

Standoffs

These M/F standoffs are used to offset the Raspberry Pi from the electronics box mounting bosses. They come pre-assembled in the electronics box.

Your bot may not have standoffs

v1.5 kits shipped before November 1st, 2020 included standoffs, while v1.5 kits shipped after November 1st, 2020 do not include any standoffs.

Material Stainless steel
Lengths 16mm
Male Threads M2.5
Female Threads M2.5, 4mm length
Price $0.50
Quantity 4 or 0 (see note above)

Tee Nuts

Combined with screws, these drop-in style tee nuts allow components such as plates and 3D printed parts to be attached quickly and securely anywhere on a V-slot aluminum extrusion.

Trade Name Drop-in Tee Nut
Material Stainless Steel
Threads M5 x 0.8mm
Fits Slot Size 6
Price $0.40
Quantity 20
Internal Part Name M5 SS Drop-in Tee Nuts
Vendor  
$/pc $0.16
Component Tests Fasteners and hardware tests
Notes  

Nut Bars

These stainless steel bars act as long tee nuts allowing M5 screws to securely hold plates, brackets, and other components to a v-slot extrusion.

Quantities may vary

v1.5 kits shipped before November 1st, 2020 included dowel pins to help better align extrusions. However, due to feedback from customers that the dowel pins were difficult to use, v1.5 kits shipped after November 1st, 2020 replaced the function dowel pins provided with new extra-long 100mm and 140mm nut bars.

Material Stainless steel
Overall Lengths 20mm, 40mm, 60mm, 100mm, 140mm
Threads M5 x 0.8mm
Fits Slot Size 6
Price 20mm - $1.50
40mm - $1.75
60mm - $2.00
100mm - $2.50
140mm - $3.00
Quantity Genesis
20mm - 6
40mm - 28
60mm - 20
100mm - 2 or 0 (see note above)

Genesis XL
20mm - 6
40mm - 54
60mm - 24
100mm - 6 or 0 (see note above)
140mm - 2 or 0 (see note above)

Genesis MAX
20mm - 6
40mm - 134
60mm - 24
Internal Part Name 20mm Nut Bar
40mm Nut Bar
60mm Nut Bar
100mm Nut Bar
140mm Nut Bar
Vendor  
$/pc 20mm - $0.39
40mm - $0.49
60mm - $0.59
100mm - $0.89
140mm - $0.95
Component Tests Fasteners and hardware tests
Notes  

20mm Nut Bar

40mm Nut Bar

60mm Nut Bar

100mm Nut Bar

140mm Nut Bar

Wood Screws

These are used to attach the track end plates and track joining plates to supporting infrastructure such as a raised.

Material Steel
Finish Black Oxide
Length 25mm
Head Diameter 12mm
Price $0.05
Quantity Genesis - 35
Genesis XL - 60
Genesis MAX - 124
Internal Part Name 25mm Wood Screw
Vendor  
$/pc $0.006
Component Tests Fasteners and hardware tests
Notes  

Dowel Pins

These pins are used to help align track extrusions and the gantry main beams.

Not inlcuded with all v1.5 kits

v1.5 kits shipped before November 1st, 2020 included dowel pins to help better align extrusions. However, due to feedback from customers that the dowel pins were difficult to use, v1.5 kits shipped after November 1st, 2020 replaced the function dowel pins provided with new extra-long 100mm and 140mm nut bars.

Material Stainless steel
Length 40mm
Diameter 1 4.2mm
Diameter 2 4.25mm
Price $2.00
Quantity Genesis: 6 or 0 (see note above)
Genesis XL: 20 or 0 (see note above)
Genesis MAX: 52

Ring Magnets

These magnets keep tools attached to the UTM.

Material Neodymium (NdFeB)
Coating Nickle (Ni)
Magnetization Through ring
Outer Diameter 15mm
Inner Diameter 5mm
Thickness 5mm
Price $3.00
Quantity 21 (6 extras included, 3 come pre-mounted to the UTM)
Internal Part Name 15 x 5 x 5mm Ring Magnet
Vendor  
$/pc $0.36
Component Tests Fasteners and hardware tests
Notes  

Zip Ties

Zip ties are used to fasten the vacuum pump and solenoid valve to their mounts, and for cable management throughout FarmBot.

Quantities may vary

v1.5 kits shipped before November 1st, 2020 included 60mm zip ties, while v1.5 kits shipped after November 1st, 2020 did not include any 60mm zip ties.

Material Nylon
Color Black
Length 60mm, 100mm, and 200mm
Price 60mm - $0.05
100mm - $0.07
200mm - $0.10
Quantity 60mm - 50 or 0 (see note above)
100mm - 25
200mm - 10
Internal Part Name 100mm Zip Tie
200mm Zip Tie
Vendor  
$/pc 100mm - $0.006
200mm - $0.015
Component Tests Fasteners and hardware tests
Notes  

60mm Zip Ties

100mm Zip Ties

200mm Zip Ties

Tools

FarmBot Genesis kits include all of the tools required to complete assembly.

3mm Hex Driver

This hex (allen) driver is used to tighten all of the M5 screws on FarmBot.

Hex Size 3mm
Bit Hardened steel with a titanium nitride coating
Handle Blue anodized aluminum
Label 3.0mm
Price $5.00
Quantity 1
Internal Part Name 3mm Hex Driver
Vendor  
$/pc $1.80
Component Tests Fasteners and hardware tests
Notes  

2mm Hex Driver

This hex (allen) driver is used to tighten all of the M3 screws and setscrews on FarmBot.

Hex Size 2mm
Bit Hardened steel with a titanium nitride coating
Handle Blue anodized aluminum
Label 2.0mm
Price $5.00
Quantity 1
Internal Part Name 2mm Hex Driver
Vendor  
$/pc $1.80
Component Tests Fasteners and hardware tests
Notes  

8mm Box Wrench

This box wrench is used to tighten all of the M5 screws on FarmBot.

Box Size 8mm
Handle Black anodized aluminum
Label 8.0 BOX
Price $5.00
Quantity 1
Internal Part Name 8mm Nut Driver
Vendor  
$/pc $1.90
Component Tests Fasteners and hardware tests
Notes  

5.5mm Box Wrench

This box wrench is used to tighten all of the M3 locknuts on FarmBot.

Box Size 5.5mm
Handle Black anodized aluminum
Label 5.5 BOX
Price $5.00
Quantity 1
Internal Part Name 5.5mm Nut Driver
Vendor  
$/pc $1.90
Component Tests Fasteners and hardware tests
Notes  

8mm Wrench

The wrench is for tightening M5 locknuts and adjusting eccentric spacers throughout FarmBot.

Size 8mm
Label 8mm
Price $3.00
Quantity 1
Internal Part Name 8mm Thin Wrench
Vendor  
$/pc $0.10
Component Tests Fasteners and hardware tests
Notes  

5.5mm Wrench

Size 5.5mm
Label 5.5mm
Price $3.00
Quantity 1
Internal Part Name 5.5mm Thin Wrench
Vendor  
$/pc $0.20
Component Tests Fasteners and hardware tests
Notes  

Phillips Screwdriver

Use this screwdriver to mount your track end plates, track joining plates, and toolbays.

Bit 6mm phillips
Handle Clear plastic
Label 6mm phillips
Price $5.00
Quantity 1
Internal Part Name Phillips Screwdriver (6mm bit size)
Vendor  
$/pc $1.30
Component Tests Fasteners and hardware tests
Notes  

2mm Allen Key

Use this tool to tighten the bits in the handles of the other drivers.

Size 2mm
Price $1.00
Quantity 1
Internal Part Name 2mm Allen Key
Vendor  
$/pc $0.05
Component Tests Fasteners and hardware tests
Notes