Specs

material Aluminum
Surface finish Sand blasted and clear anodized
Price $0.50
Quantity Genesis - 6
Genesis XL - 6
CAD model Onshape
Purchase The FarmBot Shop
internal-part-name Belt Sleeve
rev A
vendor LDO
cost $0.25

Component tests

Test Description Target Tolerance
Inner width Measure using digital calipers. 7.5mm +/- 0.1mm
Inner height Measure using digital calipers. 2.15mm +/- 0.05mm
Belt fit Assemble the belt sleeve with a belt and belt clip. The belt sleeve should fit snugly over the two belt sections and provide adequate holding force. N/A
Outer width Measure using digital calipers. 10mm +/- 0.2mm
Outer height Measure using digital calipers. 5mm +/- 0.2mm
Length Measure using digital calipers. 10mm +/- 0.5mm
Material Ensure the material is aluminum and will not rust by holding a magnet to the part. Aluminum (no magnetic attraction) N/A
Sandblasting Inspect for thorough sandblasting coverage. 100% -1%
Anodization Inspect for thorough annodization coverage. 100% -1%
Deburred Inspect for burrs. No burrs 0