Page Contents

Genesis Genesis XL
Part Notes Price Cost Qty Subtotal Subtotal Qty Subtotal Subtotal
Assembly Tools - 2mm Allen Key No plastic bag $1.00 $0.05 1 $1.00 $0.05 1 $1.00 $0.05
Assembly Tools - 2mm Hex Driver No plastic bag $5.00 $1.80 1 $5.00 $1.80 1 $5.00 $1.80
Assembly Tools - 3mm Hex Driver No plastic bag $5.00 $1.80 1 $5.00 $1.80 1 $5.00 $1.80
Assembly Tools - 5.5mm Nut Driver No plastic bag $5.00 $1.90 1 $5.00 $1.90 1 $5.00 $1.90
Assembly Tools - 8mm Nut Driver No plastic bag $5.00 $1.90 1 $5.00 $1.90 1 $5.00 $1.90
Assembly Tools - 8mm Thin Wrench No plastic bag $3.00 $0.10 1 $3.00 $0.10 1 $3.00 $0.10
Eccentric Spacer --- $2.00 $0.35 15 $30.00 $5.25 15 $30.00 $5.25
M2.5 Screw - 4mm Pre-assembled in the electronics box. $0.15 $0.010 8 $1.20 $0.08 8 $1.20 $0.08
M2.5 Screw - 6mm Pre-assembled in the Rotary Tool. $0.20 $0.012 2 $0.40 $0.02 2 $0.40 $0.02
M3 Flat Head Screw 2mm Hex Drive $0.15 $0.014 4 $0.60 $0.05 4 $0.60 $0.05
M3 Locknut 4 pieces are pre-assembled in electronics box, 20 pieces packed in bag $0.10 $0.016 24 $2.40 $0.38 24 $2.40 $0.38
M3 Screw - 6mm --- $0.10 $0.009 10 $1.00 $0.09 10 $1.00 $0.09
M3 Screw - 12mm --- $0.15 $0.014 35 $5.25 $0.49 35 $5.25 $0.49
M3 Screw - 35mm Pre-assembled in electronics box. $0.20 $0.037 4 $0.80 $0.14 4 $0.80 $0.14
M5 Flange Locknut --- $0.20 $0.09 70 $14.00 $6.30 70 $14.00 $6.30
M5 Flat Head Screw 3mm Hex Drive $0.28 $0.042 3 $0.84 $0.12 3 $0.84 $0.12
M5 Screw - 10mm --- $0.15 $0.026 150 $22.50 $3.90 200 $30.00 $5.20
M5 Screw - 16mm 12 Pre-assembled in UTM and Tools, 15 in bag $0.20 $0.033 27 $5.40 $0.89 27 $5.40 $0.89
M5 Screw - 30mm 3 pre-assembled in Tools, 40 in bag $0.30 $0.056 43 $12.90 $2.40 43 $12.90 $2.40
Magnet - Standard Pre-assembled in Seeder, Watering Nozzle, Weeder, and Soil Sensor Tools. Quantity updated for production run 2. $3.00 $0.36 15 $45.00 $5.40 15 $45.00 $5.40
Magnet - Countersunk Pre-assembled in Seeder, Watering Nozzle, Weeder, and Soil Sensor Tools. Quantity updated for production run 2. $5.00 $0.85 3 $15.00 $2.55 3 $15.00 $2.55
Nut Bar - 20mm --- $1.50 $0.45 6 $9.00 $2.70 6 $9.00 $2.70
Nut Bar - 40mm --- $1.75 $0.56 24 $42.00 $13.44 42 $73.50 $23.52
Nut Bar - 60mm --- $2.00 $0.68 20 $40.00 $13.60 20 $40.00 $13.60
Nut Bar - 100mm --- $2.50 $1.02 2 $5.00 $2.04 6 $15.00 $6.12
Nut Bar - 140mm --- $3.00 $1.09 0 --- --- 2 $6.00 $2.18
Rotary Tool Chuck Adapter --- $5.00 $0.90 1 $5.00 $0.90 1 $5.00 $0.90
Rotary Tool Chuck Only include chuck part (no other parts) $10.00 $2.90 1 $10.00 $2.90 1 $10.00 $2.90
Rotary Tool M5 Shaft Adapter Setscrew must be inserted with blue thread locker $5.00 $0.90 1 $5.00 $0.90 1 $5.00 $0.90
Rotary Tool Shaft Extension --- $5.00 $0.90 1 $5.00 $0.90 1 $5.00 $0.90
Rotary Tool Trimmer Mount --- $5.00 $0.90 1 $5.00 $0.90 1 $5.00 $0.90
Rotary Tool Trimmer Included in press-to-seal bag in Rotary Tool Box $5.00 $0.005 30 $150.00 $0.15 30 $150.00 $0.15
Spacer --- $0.20 $0.115 30 $6.00 $3.45 30 $6.00 $3.45
Tee Nuts --- $0.45 $0.18 20 $9.00 $3.60 20 $9.00 $3.60
Wood Screw --- $0.05 $0.007 35 $1.75 $0.24 60 $3.00 $0.42
Zip Tie - 100mm --- $0.07 $0.006 25 $1.75 $0.15 25 $1.75 $0.15
Zip Tie - 200mm --- $0.10 $0.015 4 $0.40 $0.06 4 $0.40 $0.06
TOTAL 620 $476.19 $81.58 719 $532.44 $99.39

Component tests

Size and shape

Test Description Target Tolerance
Drive size Use the appropriate hex or nut driver to check the drive size of screws and nuts. M3, M5, 5.5mm, 8mm, etc N/A
Screw length Measure the length of screws with digital calipers. See BOM spec. +/- 0.5mm
Threads Measure threads of screws and nuts using a thread guage See BOM spec. N/A
Head diameter Measure the diameter of screw heads with digital calipers. See BOM spec. +/- 0.2mm
Head height Measure the height of screw heads with digital calipers. See BOM spec. +/- 0.2mm
Nut height Measure the height of nuts with digital calipers See BOM spec. +/- 0.2mm
Flange diameter Measure the diameter of locknut flanges with digital calipers. See BOM spec. +/- 0.2mm

Material and appearance

Test Description Target Tolerance
Material Ensure the material is aluminum or stainless steel and will not rust by holding a magnet to the part. Aluminum or stainless steel (no magnetic attraction) Weak attraction to stainless steel is permissible.

Function

Test Description Target Tolerance
Threading Fasten screws and nuts to reference mating component to ensure thread size and quality. Components should thread together smoothly. Test 10 pieces. N/A
Locking Tighten locknuts onto a screw and try to remove by hand. Locknut should resist being removed. Test 3 pieces. N/A