Standard Spacer
These spacers are used to offset V-wheels from plates so that they may engage extrusions.
Specs
| material | Aluminum |
| outer diameter | 10mm |
| inner diameter | 5.1mm |
| length | 6mm |
| Price | $0.20 |
| Quantity |
Genesis - 30
Genesis XL - 30 |
| CAD model | Onshape |
| Purchase | The FarmBot Shop |
| internal-part-name | M5 x 6mm Spacer |
| rev | A |
| cost | $0.115 |
Component tests
| Test | Description | Target | Tolerance |
|---|---|---|---|
| Length | Measure the spacing that the spacer will provide using calipers. | 6mm | +/- 0.2mm |
| OD | Measure the outer diameter using calipers. | 10mm | +/- 0.2mm |
| ID | Measure the inner diameter using calipers. | 5.1mm | +/- 0.1mm |
| Material | Ensure the material is aluminum or stainless steel and will not rust by holding a magnet to the part. | Aluminum or stainless steel (no magnetic attraction) | Weak attraction to stainless steel is permissible. |