Seeder
Pre-assembly and packing instructions for the seeder tool
Component list
| Component | Qty |
|---|---|
| Seeder | 1 |
| M5 to Luer Lock Adapter | 1 |
| Magnets | 3 |
| M5 x 16mm Screws | 3 |
| M5 Flange Locknuts | 3 |
| M3 x 12mm Screws | 2 |
| M3 Locknuts | 2 |
| Jumper Link | 1 |
| Seeder Accessory Bag: - 2x Luer Lock Needle w/ cover (16 Gauge) - 2x Luer Lock Needle w/ cover (19 Gauge) - 2x Luer Lock Needle w/ cover (22 Gauge) |
1 |
| Seeder Box | 1 |
| Seeder Box Insert | 1 |
Step 1: Install the basic tool hardware
Install the magnets and tool verification jumper link using the instructions in the basic tool hardware reference guide.
Step 2: Add the luer lock adapter
Screw the luer lock adapter into the brass insert on the bottom of the seeder.
Step 3: Pack
Place the seeder box insert into the seeder box. Then insert the seeder accessory bag into the box followed by the pre-assembled seeder tool. Close the box.
Box specifications
| Box style | Top flap (standard FarmBot box design) |
| Inner dimensions (L x W x H) | 75mm x 75mm x 37mm |
| Outer dimensions (L x W x H) | 80mm x 80mm x 42mm |
| Material | Cardboard |
| Color | Brown |
| Printing | SEEDER.pdf |
| Fill | Cardboard insert |