material Stainless Steel
height 6mm (not including rim)
bore 5mm
rim diameter Fits into a 7.12mm hole
hex size 8mm
engraving 6mm, on the side with the shortest distance to the bore
Price $2.00
Quantity Genesis - 15
Genesis XL - 15
CAD model Onshape
Purchase The FarmBot Shop
internal-part-name M5 x 6mm Eccentric Spacer
rev A
cost $0.35

Component tests

Test Description Target Tolerance
Hex size Fit an 8mm wrench on the spacer. Wrench should fit spacer N/A
Engraving Inspect the part for a 6mm engraving on the side with the shortest distance to the bore. Engraving is in correct location N/A
Length Measure the spacing that the spacer will provide using calipers. 6mm +/- 0.2mm
OD Measure the outer diameter using calipers. 7.1mm +/- 0.05mm
ID Measure the inner diameter using calipers. 5.1mm +/- 0.1mm
Material Ensure the material is aluminum or stainless steel and will not rust by holding a magnet to the part. Aluminum or stainless steel (no magnetic attraction) Weak attraction to stainless steel is permissible.