Common specs

material	Black Nylon PA66
inside height	15mm
outside height	20mm
pitch	20mm
bending radius	28mm
CAD model	Onshape
Purchase	The FarmBot Shop
vendor	JFLO
notes	No plastic bag packaging

Variant specs

Cable Carrier - X, 1.7m

length	1.7m (85 links) + end pieces
inside width	20mm
outside width	30mm
end piece configuration	X configuration
Price	$50.00
Quantity - Genesis	1
Quantity - Genesis XL	0
internal-part-name	Cable Carrier - 15 x 20 x 1700mm (85 links + end pieces in X configuration)
vendor part number	J15BF.1.20N R28
cost	$10.90

Cable Carrier - X, 3.2m

length	3.2m (160 links) + end pieces
inside width	20mm
outside width	30mm
end piece configuration	X configuration
Price	$80.00
Quantity - Genesis	0
Quantity - Genesis XL	1
internal-part-name	Cable Carrier - 15 x 20 x 3200mm (160 links + end pieces in X configuration)
vendor part number	J15BF.1.20N R28
cost	$19.30

Cable Carrier - Y, 1.7m

length	1.7m (85 links) + end pieces
inside width	50mm
outside width	60mm
end piece configuration	Y configuration
Price	$50.00
Quantity - Genesis	1
Quantity - Genesis XL	0
internal-part-name	Cable Carrier - 15 x 50 x 1700mm (85 links + end pieces in Y configuration)
vendor part number	J15BF.1.50N R28
cost	$13.90

Cable Carrier - Y, 3.2m

length	3.2m (160 links) + end pieces
inside width	50mm
outside width	60mm
end piece configuration	Y configuration
Price	$80.00
Quantity - Genesis	0
Quantity - Genesis XL	1
internal-part-name	Cable Carrier - 15 x 50 x 3200mm (160 links + end pieces in Y configuration)
vendor part number	J15BF.1.50N R28
cost	$26.10

Cable Carrier - Z, 0.74m

length	0.74m (37 links) + end pieces
inside width	50mm
outside width	60mm
end piece configuration	Z configuration
Price	$30.00
Quantity - Genesis	1
Quantity - Genesis XL	1
internal-part-name	Cable Carrier - 15 x 50 x 740mm (37 links + end pieces in Z configuration)
vendor part number	J15BF.1.50N R28
cost	$6.50

Component tests

Test	Description	Target	Tolerance
Size	Inspect the size marking embossed into the plastic.	See BOM spec	N/A
Length	Measure the length of the cable carrier using a measuring tape.	See BOM spec	0
End pieces	Inspect the orientation of the end pieces.	Oriented according to FarmBot system design	N/A
Mount fit	Connect the end pieces to the appropriate cable carrier mounts/supports using the appropriate hardware.	Should fit as expected	N/A
Contents fit	Inert all cables and tubing into each cable carrier according to FarmBot system design.	Should fit as expected	N/A

End piece configuration

X-configuration

Y-configuration

Z-configuration