Common specs

material Black Nylon PA66
inside height 15mm
outside height 20mm
pitch 20mm
bending radius 28mm
CAD model Onshape
Purchase The FarmBot Shop
vendor JFLO
notes No plastic bag packaging

Variant specs

Cable Carrier - X, 1.7m

length 1.7m (85 links) + end pieces
inside width 20mm
outside width 30mm
end piece configuration X configuration
Price $50.00
Quantity - Genesis 1
Quantity - Genesis XL 0
internal-part-name Cable Carrier - 15 x 20 x 1700mm (85 links + end pieces in X configuration)
vendor part number J15BF.1.20N R28
cost $10.90

Cable Carrier - X, 3.2m

length 3.2m (160 links) + end pieces
inside width 20mm
outside width 30mm
end piece configuration X configuration
Price $80.00
Quantity - Genesis 0
Quantity - Genesis XL 1
internal-part-name Cable Carrier - 15 x 20 x 3200mm (160 links + end pieces in X configuration)
vendor part number J15BF.1.20N R28
cost $19.30

Cable Carrier - Y, 1.7m

length 1.7m (85 links) + end pieces
inside width 50mm
outside width 60mm
end piece configuration Y configuration
Price $50.00
Quantity - Genesis 1
Quantity - Genesis XL 0
internal-part-name Cable Carrier - 15 x 50 x 1700mm (85 links + end pieces in Y configuration)
vendor part number J15BF.1.50N R28
cost $13.90

Cable Carrier - Y, 3.2m

length 3.2m (160 links) + end pieces
inside width 50mm
outside width 60mm
end piece configuration Y configuration
Price $80.00
Quantity - Genesis 0
Quantity - Genesis XL 1
internal-part-name Cable Carrier - 15 x 50 x 3200mm (160 links + end pieces in Y configuration)
vendor part number J15BF.1.50N R28
cost $26.10

Cable Carrier - Z, 0.74m

length 0.74m (37 links) + end pieces
inside width 50mm
outside width 60mm
end piece configuration Z configuration
Price $30.00
Quantity - Genesis 1
Quantity - Genesis XL 1
internal-part-name Cable Carrier - 15 x 50 x 740mm (37 links + end pieces in Z configuration)
vendor part number J15BF.1.50N R28
cost $6.50

Component tests

Test Description Target Tolerance
Size Inspect the size marking embossed into the plastic. See BOM spec N/A
Length Measure the length of the cable carrier using a measuring tape. See BOM spec 0
End pieces Inspect the orientation of the end pieces. Oriented according to FarmBot system design N/A
Mount fit Connect the end pieces to the appropriate cable carrier mounts/supports using the appropriate hardware. Should fit as expected N/A
Contents fit Inert all cables and tubing into each cable carrier according to FarmBot system design. Should fit as expected N/A

End piece configuration

Configuration of the end pieces

The images below labelled X-Axis, Y-Axis, and Z-Axis illustrate the configuration of the end pieces. They are not representative of the actual length of the cable carriers.

X-configuration

Y-configuration

Z-configuration