Common specs

cable Shielded 28AWG/1p + 24AWG/2c

1p = 1 twisted pair (for data)
2c = 2 core (for power)
connector 1 4-pin female waterproof 90 degree connector
connector 2 Right-angle USB Type A connector
labels CAM
CAD model Onshape
Purchase The FarmBot Shop
notes Cable must be shielded USB cable or there will be EMI issues.

Variant specs

Camera Cable - 2.6m

length 2.6m
Price $15.00
Quantity - Genesis 1
Quantity - Genesis XL 0
internal-part-name Camera Cable - 2.6m (Genesis)
rev B
cost $5.70

Camera Cable - 4.1m

length 4.1m
Price $20.00
Quantity - Genesis 0
Quantity - Genesis XL 1
internal-part-name Camera Cable - 4.1m (Genesis XL)
rev B
cost $6.50

Component tests

Test Description Target Tolerance
Length Measure the length of the cable using a measuring tape. See BOM spec +/- 20mm
Diameter Measure the diameter of the cable using digital calipers. 5mm +/- 0.5mm
Cable Inspect the spec of the cable. Shielded 28AWG/1p + 24AWG/2c

1p = 1 twisted pair (for data)
2c = 2 core (for power)
N/A
Color Inspect the color of the cable. Black N/A
Labels Inspect both ends for labels. Should be labeled “CAM” N/A
Function Use the camera cable to connect a camera to a Raspberry Pi. Take a photo using the web app. Image should be captured as expected N/A
90 degree connector Connect the 90 degree connector to a camera and submerge into a cup of water. Take a photo using the web app. The connector should make a waterproof connection, allowing an image to be captured as expected N/A
Electronics box fit Connect the camera cable to the Raspberry Pi in a fully assembled electronics box. Cable and connector should fit N/A