material Aluminum
thickness 1mm
hole sizes M3
Price $0.50
Quantity Genesis - 4
Genesis XL - 4
CAD model Onshape
Purchase The FarmBot Shop
internal-part-name Jumper Link
rev A
vendor LDO
cost $0.25
notes Pre-assembled in Seeder, Watering Nozzle, Weeder, and Soil Sensor Tools

Component tests

Test Description Target Tolerance
Hole size Measure the size of the holes using digital calipers. 3.25mm +/- 0.1mm
Fit Assemble a jumper link into a tool using M3 screws and locknuts according to the FarmBot system design. Part should fit without interference N/A
Thickness Measure the thickness using digital calipers. 1mm +/- 0.2mm
Material Ensure the material will not rust by holding a magnet to the part. Aluminum (no magnetic attraction) N/A
Electrical conductivity Connect an ohm meter to both ends of a jumper link. Less than 1 ohm N/A