Specs

color White
material Stainless steel and plastic
Waterproof? true
Price $6.00
Quantity Genesis - 1
Genesis XL - 1
CAD model Onshape
Purchase The FarmBot Shop
internal-part-name LED Push Button - White
cost $2.79

Component tests

Test Description Target Tolerance
Diameter Measure the diameter of the threaded section using digital calipers. 21.8mm +/- 0.2mm
Electronics box fit Check fit in electronics box. Button should fit with minimal play such that o-ring is guaranteed to seal. N/A
Length Measure the overall length using digital calipers. 40mm +/- 1mm
O-ring Inspect for the presence of an O-ring under the top flange. Present N/A
Waterproof Drill a hole in a small plastic tub. Fasten the button to the hole and fill the tub with water. The button should continue to operate when submerged, and prevent water from leaking. N/A
Wiring harness Connect wiring harness between button and Pi Adapter Board. Button should work, harness should be of adequate length, and connectors should stay firmly attached. N/A
Material Ensure the material will not rust by holding a magnet to the part. Stainless steel (no magnetic attraction) Weak attraction to stainless steel is permissible.
Function Bind a button to a sequence and press the button. FarmBot should execute the sequence N/A
Illumination Power on FarmBot. The E-stop button should be illuminated N/A