Specs

connector 3-pin JST XH plug
wiring length 75mm
wiring DC1 and DC2 leads soldered to motor terminals, PE soldered to motor housing
Price $15.00
Quantity Genesis - 1
Genesis XL - 1
CAD model Onshape
Purchase The FarmBot Shop
internal-part-name Rotary Tool Motor - 24V, 500TB-12560
rev A
cost $1.90

Component tests

Test Description Target Tolerance
Form Factor Inspect the motor form factor. 500TB-12560 N/A
Voltage Inspect the rated voltage. 24V N/A
FWD/REV Assemble the motor into a full Rotary Tool and test with a complete FarmBot. Motor can be powered in forward and reverse at power/speed levels between 20% and 100% N/A
Load sense Assemble the motor into a full Rotary Tool and test with a complete FarmBot. Farmduino/FBOS can detect motor load and stalls in realtime N/A
Wiring Inspect the wiring. DC1 (Black) soldered to motor
DC2 (White) soldered to motor
PE (Clear) soldered to motor housing
N/A
Wire lengths Measure the length of the wires using digital calipers. 75mm +/- 5mm
Connector Inspect the connector type and plug into Rotary Tool PCB. JST XH connector should attach as expected N/A
Screw mounts Attach the motor to the Rotary Tool with M2.5 x 6mm screws. Screws should thread correctly and secure the motor in place N/A
Shaft diameter Measure the motor shaft diameter using digital calipers. 2mm +/- 0.1mm
Shaft length Measure the motor shaft length using digital calipers. 8mm +/- 0.5mm
Implement fit Attach the M5 Shaft Adapter to the motor. Adapter should securely and concentrically attach N/A