Solenoid Valve Cable
This cable connects the solenoid valve to the Farmduino.
Specs
| cable | 18AWG-2C |
| length | 0.5m |
| rated voltage | 300V DC |
| inner colors | Red and black |
| outer color | Black |
| heat shrink color | Blue |
| connector 1 | Black 2-pin plug (Molex Part 151049-2206) (Rev A, prior to July 2022) Black 2-pin plug (Molex Part 50579402) (Rev B, July 2022 and later) |
| connector 2 | Two 1/4" female shielded quick-connect terminals |
| Price | $8.00 |
| Quantity |
Genesis - 1
Genesis XL - 1 |
| CAD model | Onshape |
| Purchase | The FarmBot Shop |
| internal-part-name | Solenoid Valve Cable - 0.5m (Genesis and Genesis XL) |
| rev | B |
| cost | $1.70 |
| notes | Must perform a continuity check at factory |
Component tests
| Test | Description | Target | Tolerance |
|---|---|---|---|
| Connectors and continuity | Use the cable to connect a solenoid valve to a Farmduino. | The cable’s connectors should connect as expected and the valve should be operable. | N/A |
| Length | Measure the length using a tape measure. | 0.5m | +/- 20mm |
| Cable | Inspect the cable’s spec. | 18AWG-2C stranded copper cable | N/A |
| Shrinkwrap | Inspect the color of the shrinkwrap. | Blue | N/A |
| Color | Inspect the color of the cable. | Black outer, black and red inner | N/A |