Y Vacuum Pump Cable

Common specs

cable	Shielded 18AWG-2C (prior to July of 2022) or Shielded 22AWG-2C (July 2022 and later)
rated voltage	300V
inner colors	Red and black
outer color	Black
heat shrink color	Gray
CAD model	Onshape
Purchase	The FarmBot Shop
notes	Must perform a continuity check at factory

Variant specs

Y Vacuum Pump Cable - 2.6m

lengths	2.6m
end 1	3-pin black plug, Molex Part 2004561213 (prior to July of 2022) or 50579403 (July 2022 and later)
end 2	3-pin waterproof screw together receptacle
Price	$15.00
Quantity - Genesis	1
Quantity - Genesis XL	0
internal-part-name	Vacuum Pump Cable - Y, 2.6m (Genesis)
rev	C
cost	$4.70

Y Vacuum Pump Cable - 4.1m

lengths	4.1m
end 1	3-pin black plug, Molex Part 2004561213 (prior to July of 2022) or 50579403 (July 2022 and later)
end 2	3-pin waterproof screw together receptacle
Price	$20.00
Quantity - Genesis	0
Quantity - Genesis XL	1
internal-part-name	Vacuum Pump Cable - Y, 4.1m (Genesis XL)
rev	C
cost	$6.20

Component tests

Test	Description	Target	Tolerance
Connectors and continuity	Use the cable to connect a vacuum pump to a Farmduino.	The cable’s connectors should connect as expected and the vacuum pump should be operable.	N/A
Length	Measure the length of the two sections of cable using a tape measure.	See BOM spec	+/- 20mm
Cable	Inspect the cable’s spec.	See BOM spec	N/A
Shrinkwrap	Inspect the color of the shrinkwrap.	Gray	N/A
Color	Inspect the color of the cable.	Black outer, black and red inner	N/A