|Pogo Pin Jam Nut||24|
|M5 x 16mm Screw||3|
Attach 12 pogo pins to the UTM PCB using 24 jam nuts (2 per pogo pin).
Insert the UTM PCB into the UTM. It is keyed, and should only fit in one orientation.
Slide a ring magnet onto an M5 x 16mm screw. The magnet’s
South face should be butted against the screw head.
Fasten the PCB in the UTM with the ring magnet and screw. Repeat with two more magnets and screws.
Ensure all magnets face the same direction
All magnets must be mounted in the same magnetic orientation. The
North faces should be butted up against the PCB while the
South faces should butted against the screw heads.
Slide three x-profile o-rings onto the UTM.
Screw three barbs into the top of the UTM.
Pack the pre-assembled UTM into the UTM box.
|Box style||Top flap (standard FarmBot box design)|
|Inner dimensions (L x W x H)|
|Outer dimensions (L x W x H)|